| Customization: | Available |
|---|---|
| Application: | Communication |
| Type: | Mode Conditioning |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Mode conditioning fiber optic patch cables are used specifically in Gigabit Ethernet 1000BASE-LX/LH applications where the objective is deploying new high-speed 1000BASE-LX routers, switches, or transceivers within existing multimode system backbones.
Mode conditioning fiber jumpers are used in the 1300nm or 1310nm optical wavelength window, and should not be used for 850nm short wavelength window such as 1000Base-SX. Also, any attempt to connect 1000Base-LX/LH equipment over short distances of multimode fiber without the use of mode conditioning fiber will result in a high bit error rate, and eventually damage to the device.
1. Why do you need a mode conditioning cable?1. You want to use Gigabit 1000Base-LX equipment with your existing multimode cable plant.
2. 1000BASE-LX is specified to work over a distance of up to 5km over single-mode fiber. But 1000BASE-LX can also run over multi-mode fiber with a maximum segment length of 550m.
3. For any link distance greater than 300 m, the use of a special launch mode conditioning fiber patch cable may be required.
Mode conditioning cable launches the laser at a precise offset from the center of the multimode fiber. This causes the laser to spread across the diameter of the fiber core, reducing the effect known as differential mode delay which occurs when the laser couples onto only a small number of available modes in multi-mode fiber.
| Characteristics | Standard Fiber Cable Assemblies | |
| Connector Type | SC/LC/FC/ST/MTRJ/MPO/MTP/MU/DIN/SMA | |
| Polish Type | UPC | |
| Ferrule Materials | Zirconia Ceramic | |
| Fiber Type | MM(OM1/OM2) | |
| Testing Wavelength | 1300±30nm | |
| Insertion Loss(dB) | ≤0.2dB(PC/UPC) | |
| Return Loss(dB) | MM≥35dB(PC/UPC); SM≥55dB(PC/UPC) | |
| Exchangeability | ≤0.2dB | |
| Fiber Count | Simplex/Duplex/Multi-core | |
| Jacket Materials | PVC(Riser)/OFNR/OFNP(Plenum)/LSZH | |
| Jacket Color | OM1/OM2: Orange | |
| Operating Temp. (ºC) | -20ºC ~ +70ºC | |
| Storage Temp. (ºC) | -40ºC ~ +85ºC | |
IL and RL Testing
Conduct testing on the insertion loss and return loss of cables to verify their reach and ensure stable signal transmission.
3D Interferometer Testing
Evaluate the connectors or ferrules of cables to verify that the apex offset, radius of curvature, and fiber height are within the specified parameters, ensuring a successful connection of fiber optic lines.
End-Face Inspection
Examine the connector end face for any scratches, defects, or contamination to ensure the tips remain clean. This practice enhances communication quality and reliability, thereby contributing to network uptime.
Q1: What is the warranty of FiberMania's fiber patch cord?
A: FiberMania warrants that all fiber patch cords supplied are free from defects in material and workmanship for a period of five (5) years from the date of supply. All fiber optic bulk cables are UL profiled and every single cable is 100% tested.
){kind=link}