High Effective Information Transfer MPO Trunk Cable OM3 OM4 40G/100G Optical Fiber Patch Cord

• Customization: Available
• Application: Communication
• Type: Multi-mode Fiber
• Model NO.: MPFMPF-M3R12LAQ
• Connection Structure: MPO-MPO
• Material Shape: Round Wire
• Allowed Lateral Pressure: 100(N/100mm)
• Allowed Tensile Strength: 100N<1000N
• Core: Multicore
• Certification: RoHS, CE, ISO9001
• Brand: OEM
• Sheath Material: LSZH/OFNP
• Connector A: MPO Female
• Connector B: MPO Female
• Polish Type: UPC to UPC
• Fiber Count: 12 Fibers
• Fiber Mode: OM3 50/125μm
• Glass Fiber: Bend Insensitive Fiber
• Polarity: Type A/Type B/Type C
• Min. Bend Radius (Fiber Cable): 20/10D (Dynamic/Static)
• Minimum Bend Radius: 3.0mm
• Wavelength: 850/1300nm
• Attenuation at 850nm: ≤2.3dB/km
• Attenuation at 1300nm: ≤0.6dB/km
• Tensile Strength (Long/Short Term): 80/240N
• Operating Temperature: -10 to 60°C
• Storage Temperature: -10 to 70°C
• Transport Package: Carton
• Trademark: FiberMania
• Origin: Shenzhen, China
• Production Capacity: 5, 000 Pieces Per Month
• Package Size: 37.00cm * 27.00cm * 18.00cm
• Package Gross Weight: 0.010kg

Product Description

High Effective Information Transfer MPO Trunk Cable OM3 OM4 40G/100G Optical Fiber Patch Cord

MPO (Multi-fiber Push-On) jumpers are optical transmission components based on high-density multi-fiber optical connectors. They are mainly precision-manufactured using MPO/MTP connectors and multi-fiber optical cables, achieving accurate positioning and connection through guide pins and guide holes on the ferrule end face. Their core feature is the multi-fiber parallel transmission structure, which can integrate 2-144 fibers. The mainstream models are primarily 12-fiber, 24-fiber, and 48-fiber, enabling simultaneous transmission of multiple optical signals through a single jumper.
 
This product adopts MT series precision ferrules (size: 6.4×2.5mm) with a snap-lock mechanical structure, supporting quick plug-and-play operations. The connector is equipped with a dust cap to protect the end face from contamination. Functionally, it can be divided into two types: non-adaptive type (with MPO interfaces at both ends, used for direct interconnection between devices) and adaptive type (with an MPO interface at one end and fan-out single-fiber interfaces such as LC/SC/FC at the other end, realizing adaptation of different interfaces). It fully complies with Telcordia-GR-326, IEC international standards and RoHS environmental requirements.

Features

1. Replaces multiple single-fiber jumpers, increasing wiring density by over 80% and saving cabinet space; supports 48+ fibers for large data centers.
2. Ensures precise fiber alignment with insertion loss ≤0.35dB (low-loss) and return loss ≥55dB (single-mode APC), supporting stable 400G/800G transmission.
3. Push-pull plug-and-play design supports hot-swapping; color-coded with clear polarity (Type A/B/C) for easy debugging.
4. LSZH/OFNR/OFNP sheath, operating temp -30℃~60℃ (LSZH), plugging life ≥500 times with stable performance.
5. Customizable fiber count (8-144), length; compatible with 10G-1.6T networks for smooth upgrades.

Applications

1. Core for high-speed interconnection between servers/switches; compatible with 400G/800G optical modules. Improves wiring density by 50% and reduces power consumption by 20% in large data centers.

2. Connects optical modules and antennas in 5G base stations, providing microsecond-level latency for autonomous driving/telemedicine; used for signal distribution in telecom networks.

3. Enables LAN interconnection between buildings, supporting cloud office and video conferences; deployed between core/access switches to achieve 10Gbps full coverage in parks.

Specification

Connector	MPO/MTP(Male/Female)
Fiber Mode	SM(OS2)		MM(OM1/OM2/ OM3/OM4/OM5)
Polishing Type	PC	APC	PC
Insertion Loss	Typical≤0.30dB Max≤0.75dB Typical≤0.15dB (Elite) Max≤0.35dB (Elite)		Typical≤0.60dB Max≤0.25dB Typical≤0.10dB (Elite) Max≤0.35dB (Elite)
Return Loss	≥50dB ≥55dB(Elite)	≥60dB ≥65dB(Elite)	≥20dB
Repeatability	≤0.1dB
Durability	≤0.2dB (1000 times mating)
Fiber Count	8/12/24/48/72/96/144 Fibers
Cable Jacket	PVC/OFNR/OFNP/LSZH
RoHS Compliancy Status	Compliant

Connector	MPO/MTP(Male/Female)			LC/SC/FC/ST
Fiber Mode	SM(OS2)		MM(OM1/OM2/ OM3/OM4/OM5)	SM(OS2)		MM(OM1/OM2/ OM3/OM4/OM5)
Polishing Type	PC	APC	PC	UPC	APC	UPC
Insertion Loss	Typical≤0.30dB Max≤0.75dB Typical≤0.15dB (Elite) Max≤0.35dB (Elite)		Typical≤0.50dB Max≤0.25dB Typical≤0.10dB (Elite) Max≤0.35dB (Elite)	Typical≤0.15dB Max≤0.3dB		Typical≤0.15dB Max≤0.3dB
Return Loss	≥50dB ≥55dB(Elite)	≥60dB ≥65dB(Elite)	≥20dB	≥50dB	≥60dB	≥35dB
Repeatability	≤0.1dB
Durability	≤0.2dB (1000 times mating)
Fiber Count	8/12/24/48/72/96/144 Fibers
Cable Jacket	PVC/OFNR/OFNP/LSZH
RoHS Compliancy Status	Compliant

Product Applications

Centered on high-density advantages, MPO/MTP jumpers dominate ultra-high-speed optical network connections: they support 400G/800G/1.6T interconnection in data centers, improving wiring density and energy efficiency; ensure low-latency transmission in 5G base stations to empower critical services; realize high-speed inter-building connection and full-area bandwidth coverage in enterprise and campus networks, while adapting to the connection of active optical devices and dense wiring needs of FTTx.

MPO MTP Solutions Specifications

Test Item	Typical Standard Value / Requirement	Reference Standard	Applicable Product(s)
Insertion Loss (IL)	≤ 0.35 dB (Standard Grade) / ≤ 0.20 dB (Elite Grade)	IEC 61300-3-4 / TIA-568.3-D	Trunk Cables, Cable Assemblies, Cassettes, Loopbacks
Return Loss (RL)	≥ 20 dB (Multimode) / ≥ 60 dB (Singlemode, APC)	IEC 61300-3-6 / TIA-604-5 (FOCIS 5)	All MPO/MTP Products
Polarity / Mapping Verification	Correct mapping Type A/B/C per design	TIA-568.3-D Annex F	Trunk Cables, Cassettes, Patch Panels
Endface Geometry (3D Interferometry)	Apex Offset ≤ 50 μm, Radius 2000±500 μm, Fiber Height ±50 nm	IEC 61300-3-35	MPO/MTP Connectors & Adapters
Durability (Mating Cycles)	≥ 500 mating cycles, no significant IL/RL degradation	IEC 61300-2-2	Connectors, Adapters
Tensile Strength	≥ 100 N (Short length) / ≥ 200 N (Trunk cables)	IEC 61300-2-4 / GR-326-CORE	Trunk Cables, Assemblies
Cable Flex / Bending Test	≤ 0.3 dB IL change after 100 cycles at 100 mm radius	IEC 61300-2-42	Trunk Cables, Assemblies
Crush Resistance	≥ 1000 N / 100 mm without optical failure	IEC 60794-1-21 (E3)	Trunk Cables
Impact Resistance	No optical degradation after 1 J impact	IEC 61300-2-12	Trunk Cables, Cassettes
Operating Temperature Range	-40°C to +75°C (Indoor/Outdoor rated)	IEC 61753-1	All MPO/MTP Products
Humidity Resistance	≤ 0.3 dB IL change after 96 h @ 40°C, 95% RH	IEC 61300-2-19	Assemblies, Cassettes
Vibration Test	≤ 0.2 dB variation after 10–55 Hz, 1.5 mm amplitude	IEC 61300-2-1	Trunk Cables, Adapters
Cable Jacket Flame Retardancy	Compliant with LSZH / OFNR / OFNP / CPR Eca–B2ca	IEC 60332 / IEC 60754 / EN 50575	Trunk Cables
Connector Ferrule Material Quality	High-precision MT ferrule with fiber hole concentricity ≤ 1 μm	TIA-604-18 / IEC 61754-7	MPO/MTP Connectors
Interferometric Inspection (Endface Cleanliness)	No contamination, scratches, or debris in core area	IEC 61300-3-35	All MPO/MTP Connectors
Loopback Functional Test	Verify TX/RX channel continuity, IL ≤ 0.5 dB	Factory QA Test Procedure	MPO/MTP Loopbacks
Panel Port Retention Strength	≥ 30 N retention without disconnection	IEC 61300-2-6	Patch Panels, Adapter Panels
Adapter Plug/Unplug Force	Insertion ≤ 40 N / Withdrawal ≤ 20 N	IEC 61300-2-42	Adapters & Accessories
System Performance Verification	100G / 200G / 400G link compliance test (per IEEE 802.3ba/bj/bm)	IEEE 802.3 Standards	Trunk Cables, Assemblies, Cassettes

Why Choose FiberMania Fiber Optic Cables

Customized Solutions

Advanced Testing Labs

Design & Engineering Expertise

Customized fiber optic cables tailored to your exact specifications, ensuring optimal performance for any network scenario.

Equipped with comprehensive and stringent testing processes to guarantee quality, reliability, and compliance with international standards.

Our team provides innovative solutions and professional design support for unique deployment needs.

Remote Technical Support

Global Distribution Network

Quality & Certification Assurance

Access our lab remotely for testing or troubleshooting switches and systems to ensure smooth deployment.

Fast, flexible, and reliable supply from strategically located warehouses to meet urgent and unpredictable demand worldwide.

All products comply fully with ISO9001, UL, CE, and other internationally recognized certifications and industry standards.

Famous We Work With

Workshop Display

Production Process

Cable Cutting

Parts Pre-Assembling

Cable Stripping

Fiber Insertion

Fiber Curing

Connector Assembly

Ferrule Polishing

Magnifier Checking

3D Inspection

IL & RL Inspection

OQC

Carton Packing

Certifications

Packaging & Shipping

FAQ

Q1: What is the warranty of FiberMania's fiber patch cord?

A: FiberMania warrants that all fiber patch cords supplied are free from defects in material and workmanship for a period of five (5) years from the date of supply. All fiber optic bulk cables are UL profiled and every single cable is 100% tested.

Q2: Is it possible to customize our brand information on your fiber cable?
A: Yes, we can print your brand name onto our cable jacket and 1KM total cable length is requested.

Q3: Can you do 3D interferometer test?
A: Yes, we do the 3D test per our customer's request, we can have the pass rate over 90% and even 100% if necessary.

Q4: What is your MOQ of your products?
A: We only have MOQ for some special customized cable order, we request 1km as the total length of the bulk cable, you may consider stock the bulk cable with us for your urgent order production.

Q5: Are free samples available from you?
A: Yes, we are always happy to offer the free samples for all of our customers' projects provided that the total cost is under 50 US dollars.