China Factory Indoor Cable 1~288 Core Single Mode Multimode PVC LSZH Communication Fiber Optic Cable
Indoor communication fiber optic cables are mainly composed of optical fibers (glass fibers as thin as hair), plastic protective sleeves, and flame-retardant outer sheaths. Internally composed of a certain number of optical fibers in a certain way to form a fiber core, wrapped with a sheath, and some even wrapped with an outer protective layer, it is designed specifically for building interiors or indoor environments to achieve optical signal transmission. It is mainly used for short distance optical signal transmission.
At FiberMania, we carry a full range of fiber optic cables in many different specifications, including single-mode, multimode, simplex, and duplex in many different core sizes. So with our large stock of fiber optic cables, we can manufacture many pre-terminated patch cables in various lengths, with the main fiber connection types of SC, ST, LC, FC, MTRJ, MTP/MPO, ODLC, PDLC, and more.
Fiber optic cable permits data transmission over longer distances and at higher data rates than other cables (as high as 100Gbit). For longer runs cable, we also offer bulk fiber optic cable, which can be cut and fitted with connectors for any length you need.
For all your fiber optic cabling requirements, FiberMania is your one-stop warehouse to work with. Look through our full selection of products or contact us for help finding the right cabling for you!
Features
1. Good uniformity of the outer diameter of tight buffer fiber and excellent strippability.
2. Good performance of flame-retardant
3. Steady performance both in extremely high and low temperature.
4. Excellent geometrical dimension of the fiber
Applications
1. Used in the manufacture of patch cords
2. Designed for short-run indoor patching or where frequent handling is likely
3. Color-coded for ease of identification during and post installation
4. Comes in both single fiber (SFC) and duplex fiber (ZIP) constructions
5. Ideal for LAN backbones, telecom access line, campus networks, and FTTX drops
Optical Characteristics
| Fiber type |
Attenuation |
Bandwidth |
Effective modal bandwidth |
10 GB/s Link Length |
| Conditions |
1310/1550nm |
850/1300nm |
850/ |
850nm |
850nm |
| Typical |
Maximum |
Typical |
Maximum |
1300nm |
| Unit |
dB/km |
dB/km |
dB/km |
dB/km |
MHz.km |
MHz.km |
m |
| G652D |
0.5/0.4 |
0.6/0.5 |
/ |
/ |
/ |
/ |
/ |
| G657A1 |
0.5/0.4 |
0.6/0.5 |
/ |
/ |
/ |
/ |
/ |
| G657A2 |
0.4/0.3 |
0.5/0.4 |
/ |
/ |
/ |
/ |
/ |
| G657B3 |
0.5/0.4 |
0.6/0.5 |
/ |
/ |
/ |
/ |
/ |
| 62.5/125 |
/ |
/ |
3.5/1.0 |
3.5/1.5 |
≥160/500 |
/ |
/ |
| 50/125/ |
/ |
/ |
3.0/1.0 |
3.5/1.5 |
≥200/500 |
/ |
/ |
| OM1 |
| 50/125/ |
/ |
/ |
3.0/1.0 |
3.5/1.5 |
≥500/500 |
/ |
/ |
| OM2 |
| OM3-150 |
/ |
/ |
3.0/1.0 |
3.5/1.5 |
≥700/500 |
≥950 |
150 |
| OM3-300 |
/ |
/ |
2.5/0.8 |
3.0/1.0 |
≥1500/500 |
≥2000 |
300 |
| OM4-550 |
/ |
/ |
2.5/0.8 |
3.0/1.0 |
≥3500/500 |
≥4700 |
550 |
Mechanical Parameters
Fiber
Count |
Nominal
Diameter (mm) |
Nominal
Weight
(kg/km) |
Max Fibers
per Tube |
Max
No. of
(Tubes+
fillers) |
Allowable Tensile
Load (N) |
Allowable Crush
Resistance
(N/100mm) |
|
|
|
|
| Short Term |
Long Term |
Short Term |
Long Term |
| 2~30 |
13.2 |
162 |
6 |
5 |
3000 |
1000 |
3000 |
1000 |
| 32~48 |
13.8 |
175 |
8 |
6 |
3000 |
1000 |
3000 |
1000 |
| 50~72 |
14.6 |
205 |
12 |
6 |
3000 |
1000 |
3000 |
1000 |
| 74~96 |
16 |
230 |
12 |
8 |
3000 |
1000 |
3000 |
1000 |
| 98~144 |
17.6 |
285 |
12 |
12 |
3000 |
1000 |
3000 |
1000 |
| >144 |
Available upon customer's request |
Environmental Characteristics
| Transport Temperature |
-20ºC~+60ºC |
| Storage Temperature |
-20ºC~+60ºC |
| Installation Temperature |
-5ºC~+50ºC |
| Operating Temperature |
-20ºC~+60ºC |
Fiber Optic Cable Specifications
| Item |
Single Mode |
Single Mode |
Single Mode |
Multimode |
Multimode |
Multimode |
Standard |
| Optical Performance |
Grade B |
Grade C |
Grade D |
Grade Bm |
Grade Cm |
Grade Dm |
IEC 61753-1 |
| Insertion Loss(dB) |
≤0.12 |
≤0.15 |
≤0.50 |
≤0.30 |
≤0.50 |
NA |
IEC 61300-3-34 |
| Insertion Loss(dB), Radom Mated(≥97%) |
≤0.25 |
≤0.50 |
≤1.00 |
≤0.60 |
≤1.00 |
NA |
IEC 61300-3-34 |
| Return Loss(dB), Radom Mated |
≥45(Grade 2m) |
≥35(Grade 3m) |
≥26(Grade 4m) |
≥20(Grade 2m mated) |
≥20(Grade 2m mated) |
≥20(Grade 2m mated) |
IEC 61300-3-6 |
| Mechanical Performance |
IEC 61753-1 |
| Mating Durability |
500 Matings (≤0.2dB) |
IEC 61300-2-2 |
| Cable Crush(N/100mm) |
1000 |
IEC 60794-1-21 |
| Operating Temperatures(ºC)C Level |
-20(ºC) - +60(ºC) |
IEC 61753-1 |
| Operating Temperatures(ºC)OP Level |
-25(ºC) - +70(ºC) |
IEC 61753-1 |
Fiber Optic Cable Custom
| Single Mode Cables |
|
-
Fiber type (G.652D, G.657A1/A2, etc.)
-
Jacket(PVC, LSZH, PE, PU)
-
Cable Structure (tight-buffered, loose tube, Simplex, Duplex)
-
Connector Types (LC, SC, FC, ST, E2000, MU, MPO, etc.)
-
Cable color, length, and labeling
|
| Multimode Cables |
|
- Fiber grade (OM2 / OM3 / OM4 / OM5)
- Jacket type (PVC, LSZH, plenum-rated)
- Connector types and polishing (PC, UPC, APC)
- Color coding and labeling per TIA/EIA standards
- Custom bundles or trunk assemblies
|
| Armored / Ruggedized Cables |
|
-
Armor type (steel wire, corrugated steel tape, aramid yarn)
-
Outer sheath materials and thickness
-
Tensile strength and crush resistance levels
-
Connector types and waterproof connectors (IP67/68)
-
Length, jacket color, and branding
-
OEM labeling and bulk supply packaging
|
| Multi-Fiber / Ribbon Cables |
|
-
Fiber count (8, 12, 24, 48, 96, or higher)
-
Ribbon type (bare, encapsulated, mass-fusion ready)
-
MPO/MTP connector configurations
-
Polarity type (A/B/C)
-
Breakout or fanout design options
-
Cable jacket and outer diameter
|
| Pigtails / Patch Cords |
|
-
Connector types and combinations (LC-LC, LC-SC, FC-ST, etc.)
-
Polishing style (PC, UPC, APC)
-
Cable length and jacket type
-
Fiber count (simplex, duplex, multi-core)
-
Color coding, labeling, and OEM packaging
-
100% insertion/return loss test with report
|
| Direct Attach Copper (DAC) Cables |
|
-
Data rate and form factor (SFP+, QSFP+, QSFP28, QSFP-DD)
-
Cable length and AWG size
-
Breakout configurations (e.g., 1×QSFP to 4×SFP)
-
Labeling, serial number, and EEPROM programming
-
Branding, packaging, and test report options
|
| Specialty / Active Optical Cables (AOC) |
https://fibermania.en.made-in-china.com/product/TYsrxziJIpVB/China-ODM-OEM-40G-QSFP-to-QSFP-QDR-10M-Active-Optical-Cable.html?pv_id=1jc0iotuldd2&faw_id=1jc0ipin9561&bv_id=1jc0ipinbb0b |
-
Interface type (SFP+, QSFP+, QSFP28, QSFP-DD, CXP, etc.)
-
Data rate (10G / 25G / 40G / 100G / 400G)
-
Cable length and color
-
EEPROM coding and compatibility tuning
-
Branding, labeling, and packaging customization
|
Why Choose FiberMania Fiber Optic Cables
Design & Engineering Expertise
Customized fiber optic cables tailored to your exact specifications, ensuring optimal performance for any network scenario.
Equipped with comprehensive and stringent testing processes to guarantee quality, reliability, and compliance with international standards.
Our team provides innovative solutions and professional design support for unique deployment needs.
Global Distribution Network
Quality & Certification Assurance
Access our lab remotely for testing or troubleshooting switches and systems to ensure smooth deployment.
Fast, flexible, and reliable supply from strategically located warehouses to meet urgent and unpredictable demand worldwide.
All products comply fully with ISO9001, UL, CE, and other internationally recognized certifications and industry standards.
Production Equipment
Packaging & Shipping
FAQ
Q1: What is the warranty of FiberMania's fiber patch cord?
A: FiberMania warrants that all fiber patch cords supplied are free from defects in material and workmanship for a period of
five (5) years from the date of supply. All fiber optic bulk cables are UL profiled and every single cable is 100% tested.
Q2: Is it possible to customize our brand information on your fiber cable?
A: Yes, we can print your brand name onto our cable jacket and 1KM total cable length is requested.
Q3: Can you do 3D interferometer test?
A: Yes, we do the 3D test per our customer's request, we can have the pass rate over 90% and even 100% if necessary.
Q4: What is your MOQ of your products?
A: We only have MOQ for some special customized cable order, we request 1km as the total length of the bulk cable, you may
consider stock the bulk cable with us for your urgent order production.
Q5: Are free samples available from you?
A: Yes, we are always happy to offer the free samples for all of our customers' projects provided that the total cost is under
50 US dollars.
Audited Supplier 
){kind=link}